IoT Load Control Switch

Universal load control switch for remote relay control. Tariff switching | Load management | Lighting control

Smart Grid
Electricity Meters
Wireless access
Street lighting
Load Management
Fault monitoring

Simple, but versatile solution suitable for a wide range of IIoT applications. It allows operators to control connected devices via relays on-demand or automatically according to an autonomous schedule.

Our 4-relay load control switch is a compact and cost-effective solution for the remote control of connected devices. It consists of a switch and a modem integrated all-in-one. It possible to optimize current consumption in closed distribution systems in industrial, agricultural, and other companies and institutions and to obtain financial savings.


The Modern Substitute for Legacy Ripple Control Systems

First-generation ripple control systems were limited by one-way communication, with which centralized load control and peak shaving have been performed for many years. Modern real-time Distribution Automation applications and advanced metering solutions require two-way communication and higher data rates than what second-generation PLC systems can deliver. Standardized cellular networks operating in licensed bands constitute a promising technology to address all the performance limitations of other wireless technologies for both metering and DA applications.


Smart Grid – Load Management

Load management has a crucial role in the future of energy management systems. It allows utilities and smart grid operators to balance the supply with the electrical load by controlling the load rather than the power station output. Our product is suitable for all kinds of smart grid applications.

Solar farm operators for the remote control of inverters, in order to balance supply to the demand.

As part of a Demand Response Systems (DR), our load control switch can be used to monitor energy usage in the area and automatically switch off equipment with high consumption such as water heaters or HVAC systems when demand spikes. The 4 relays of the switch can be configured to control electric loads.


Street Light Management

This product enables operators to control public lighting remotely. Upgrade your street light control cabinets with smart features by adding our Load Control Box. It allows fine-tuned control and supervision of all the components including lamps and dimming light intensity to each of the electric cabinets according to particular needs. One box is able to control 4 street lamp groups, which can accommodate hundreds of lamps. This can be done on-demand or according to a scheduled program.


In each control cabinet, our solution provides the following features for maximum smart integration:

  • Power consumption monitoring
  • Lamps status and external sensors (lighting, magnetic) data collection
  • Data sent to a central control platform through cellular networks
  • Autonomous load control through scheduled operations


Along with these features, advanced monitoring and management processes are included:

  • Power consumption by each street light group through the use of three-phase power analyzers
  • Lamp failure detection
  • Remote management and maintenance capabilities
  • IEC 1107 / OSLP protocol

Customization is available!



  • Central switching for authorized persons only
  • 4pcs relay for control (two switch modes)
  • Light switching by schedules, depending on weekdays/sunset/geo-position – or on-demand
  • Event and operation monitoring and reporting
  • Remote parametrizing, FW updates, reboot
  • Supercapacitor to protect against outages
  • Security features to ensure protection



Technical features

  • Cellular module order options:
    • LTE Cat.1 module with 2G/3G “fallback” feature
    • LTE Cat.M / Cat.NB modules with 2G “fallback” option
  • Ethernet / RS485 / P1 interface (RJ45)
  • 4pcs relays for switching (latching relays with 2 switch modes (COM, NC and COM, NC, NO))
  • Supercapacitor (for safe shutdown in case of power outage)
  • micro-SD card slot (by order option)


    Energy Monitoring software

    • Scalable smart grid control and public lighting systems control (OSLP protocol)
    • Supplier requested on-demand central lighting control
    • Handling time zones, daylight saving, schedule
    • Monitoring operation, event reporting, outage management
    • Authorized access and control
    • Data analysis, energy optimalization
    • Alerts (outages, consumption reductions, energy falls)


    Device Manager

    • Complete communication device network management
    • Continuous device operation and network monitoring, reports, alerts, QoS monitoring
    • Remote configuration, firmware updates, reboot



    • Highly secure TLS data encryption, communication
    • Supercapacitor against outages
    • OpenWrt embedded system (Linux-based device operating software, web UI)
    • IEC 1107 / OSLP open protocol (device-server)
    • Time synchronisation / NTP client / RTC
    • Event memory (power failures, switching)


    Technical data

    Load Control Box

    Product Datasheet

    Installation Guide

    User Manual

    Quick Guide

    You may also like…


    The remote management and maintenance of an IIoT solution can be a real challenge. Improve the network availability and operational efficiency of your fleet!

    WM-E3S Modem for Elster AS smart meter family

    Cellular modem specifically designed for Honeywell / Elster AS220/AS230/AS300 and AS1440, AS3000/AS3500 electricity meters. Available for LTE Cat.1 / 2G / 3G, LTE Cat.4, Cat.M / Cat.NB networks.

    Request quote

    We are using Google Analytics

    Please note that we use Google Analytics monitoring to analyze traffic and interests on our website, in order to provide an anonymous view of the distribution of visits.
    uses personal information - to make internal, marketing decisions (promotions, trends, visits to visiting companies). We don't send these data to third parties.
    Learn more about Google's privacy policy:

    Please use the buttons below to enable if you accept use Google Analytics, or indicate if you do not enable it.