WM-E2S Modem for PME-PMI Meters

UPGRADE THE MODEMS NOT THE SMART METERS!

All around the world mobile operators are shutting down 2G/3G networks in order to give way to 5G. Companies that operate smart meters with 2G/3G connectivity must plan the migration to the latest 4G LTE network which is well-positioned to dominate smart metering communication technologies in the upcoming years. The migration from GSM / UMTS to LTE has many advantages, for example, a shorter readout time due to the high-speed network with low latency.

Utilities have two options for migration: replace the meters or upgrade the modems within their routers! The 1st option comes with a high CAPEX, while the 2nd option is a future-proof solution that reduces TCO.

Our company develops cellular modems that work smoothly and are fully compatible with the 3-phase PME-PMI electricity meters. This device was designed to be fully compliant with all PME-PMI standards. Our cellular modems represent a future-proof migration solution to the LTE network with the same functionality, on higher data speed. Configuration and firmware updates can be done remotely, minimizing the need for costly site visits.

This external modem can be mounted using a DIN-rail and connected to the meter through an RJ45 cable. It can be configured to “push” the data it reads from the meter to the HES periodically at pre-programmed intervals or triggered by an alarm/event (for example, power outage, cover removal, reverse run etc.).

The modem reads actual and stored consumption data, recorded event log, load profile data, and can be used to read or modify certain parameters of the meter remotely. The device can be powered from the RJ45 connector.

It can be accessed remotely through the cellular network and it can send data on the Internet by using an APN.

The modem is fully configurable by our WM-E Term^®software.

Main features

Cellular module order options:
- 4G LTE Cat.4 / 3G / 2G
- 4G LTE Cat.1 – 2G or 2G/3G “fallback”
- LTE Cat.M / Cat.NB with 2G “fallback”
External modem in a compact design (separated from the meter)
It can be fastened securely by its DIN-rail adapter
DC power supply from the meter
RS232 meter connection (RJ45)
Compatibility with PME-PMI^® electricity meters (Itron^® ACE6000, Landis+Gyr^® ZMG416, Enedis^® NOI CPT-36E meter types)
IEC 62056-21 protocol, transparent mode
CSData call
Optional „push” mode (FTP, IEC or SMS triggered)
TLS encyption (optional)
Supercapacitor (for power outage), LastGASP notification – order option
Remote & safe firmware updates
WM-E Term^®configuration tool
Device Manager^® software (order option)

Application

Utility companies
Meter data transmission to HES
Smart metering
Industrial measurement

Design and outfit

External modem, compact design (separated from meter)
It can be fastened securely by its DIN-rail adapter
RS232 interface (RJ45 connection for meter connection, meter configuration)
DC power by meter
External FME or SMA antenna interface (50 Ohm)

Compatibility

PME-PMI^® meters (Itron^® ACE6000, Landis+Gyr^® ZMG416, Enedis^® NOI CPT-36E type meters)

Operation

IEC 62056-21 protocol, transparent data transmission
„Push” mode (FTP or IEC sending, SMS triggered)
CSData call
Optional TLS encryption
Immediate alarm SMS notification (LastGASP power loss)

Accessories (Order options)

RJ45 cable (1m long for configuration / meter connection)
USB Dongle for modem configuration
External FME / SMA antenna (50 Ohm)
35mm DIN-rail adapter (by anodized aluminum with spring steel wire)
Supercapacitor (for LastGASP SMS notification in case of power outage, status changes)
WM-E Term^® software (mass FW updates, actualization of settings)
You can manage the device by Device Manager^® software