WM-E2S Modem for Itron Meters

Cellular modem specifically designed for the Itron ACE6000, ACE8000, SL7000 and EM600 (E620) electricity meters. Available for 2G, LTE Cat.1 / 2G / 3G, LTE Cat.M/Cat.NB, LTE Cat.M 450MHz networks.

Villanyóra modem
Smart Metering
Vezetéknélküli
RS232 / RS485
Firmware frissítések
Távoli elérés

UPGRADE THE MODEMS NOT THE SMART METERS!

All around the world mobile operators are shutting down 2G/3G networks in order to give way to 5G. Companies that operate smart meters with 2G/3G connectivity must plan the migration to the latest 4G LTE network which is well-positioned to dominate smart metering communication technologies in the upcoming years. The migration to LTE has many advantages, for example, a shorter readout time due to the high-speed network with low latency.

Utilities have two options for migration: replace the meters or upgrade the modems within their routers! The 1st option comes with a high CAPEX, while the 2nd option is a future-proof solution that reduces TCO.

This cellular modem works smoothly and is fully compatible with the Itron® SL7000, ACE6000, ACE8000 type electricity meters. The case was designed to fit under the terminal cover of the meter and is fully compliant with all Itron standards. It connects to the meter through its RS232 or RS485 connector. It can also be mounted externally on a DIN-rail.

Our cellular modem represent a future-proof migration solution to the LTE network with the same functionality, on higher data speed. Configuration and firmware updates can be done remotely, minimizing the need for costly site visits.

As part of an AMR/AMI solution, the modem provides a stable, transparent connection to the meter through which the HES can pull consumption data from the meter.

The modem can send data by CSData call (2G) also. The ideal solution for remote readout of registers and consumption data of the connected electricity meters.

The modem is fully configurable by our powerful and easy-to-use WM-E Term® software.

 

Main features

  • Wireless module order options:
    • 2G
    • 4G LTE Cat.1 with 2G “fallback” or 2G / 3G “fallback”
    • 4G LTE Cat.4 /3G / 2G
    • LTE Cat.M / Cat.NB with 2G “fallback” or 450MHz option
  • It can be assembled into the meter’s enclosure and fastened securely (sealed and separated from meter)
  • Design & connectivity meets with meter standards
  • Compatibility with Itron® ACE6000, ACE8000, SL7000 (3W) and EM600 (E620) electricity meters
  • DC power supply from the meter
  • RS232 / RS485 transparent data connection (RJ45)
  • Embedded, realtime operation system
  • „Pull” data sending (for HES request), CSData call
  • Immediate alarm- and SMS notification
  • Remote & safe firmware updates
  • Downloadable WM-E Term® configuration tool
  • Supercapacitor (against power outages)
  • Device Manager® software (order option)

 

Application

  • Utility companies
  • Meter data transmission to HES
  • Smart metering
  • Industrial measurement

Design and outfit

  • The modem is installable into the meter enclosure
  • RS232 or RS485 interface connection (RJ45 connector) – fixed connection of free-to jumper outfit can be ordered
  • DC power supply by meter
  • Supercapacitor, Last GASP notification
  • SMA or FME antenna connector outfit (by order request)

 

Compatibility

  • Itron® ACE6000, ACE8000, SL7000 and  EM600 (E620) meters

 

Operation

  • IEC 62056-21 protocol, transparent data transmission
  • „Pull“ data sending (for HES request)
  • CSData call (2G)
  • Immediate notification, SMS messages, DCD control

 

Accessories

  • RJ45 cable (for meter connection/configuration)
  • USB/RS232 DONGLE adapter (for configuration) – order option
  • Optional SMA / FME antenna (50 Ohm) – upon request
  • DIN-rail adapter (optional) – for external modem installation
  • WM-E Term® configuration software
  • Device Manager® software (order option)

 

Technical data

WM-E2S v5 Modem – 2G module, LTE Cat.4 / 3G / 2G module, LTE Cat.1 modules with 2G or 2G/3G “fallback” feature, LTE Cat.M / Cat.NB / 450MHz module with optional 2G “fallback”

WM-E1S

 

WM-E2S v2 Modem – LTE Cat.1 modules with 2G or 2G/3G “fallback” feature, LTE Cat.M / Cat.NB modules with optional 2G “fallback” feature (with limited ITRON ACE 6000 connection)

WM-E1S

Datasheet – WM-E2S v5 Modem – 2G module, LTE Cat.1 modules with 2G or 2G/3G “fallback” feature, LTE Cat.M / Cat.NB / 450MHz module with optional 2G “fallback” feature

Datasheet – WM-E2S v2 Modem – LTE Cat.1 modules with 2G or 2G/3G “fallback” feature, LTE Cat.M / Cat.NB modules with optional 2G “fallback” feature (with limited ITRON ACE 6000 connection)


Quick Guide

Installation Manual

WM-E Term User Manual

WM-E2S Parameter Description

WM-E Term Appendix


WM-E Term configuration software

WM-E2S sample configuration file for Itron meters (compressed ZIP file, extract the CFG file)

Relevant products

...
4G LTE rotatable Mount Flat antenna

4G LTE rotatable Mount Flat antenna with 5dBi gain

...
NEW!
USB/RS232 DONGLE

USB adapter for configuration of the WM-E2S (Itron compatible) and WM-E2SL (Landis+Gyr compatible) modems

...
WM-E1SI Modem for Itron Meters

Cellular modem for Itron electricity meters – for LTE Cat.4, LTE Cat.1 / 2G / 3G, LTE Cat.M and Cat.NB networks

...
IoT DEVICE MANAGER

The remote management and maintenance of an IIoT solution can be a real challenge. Improve the network availability and operational efficiency of your fleet!

Request quote

We are using Google Analytics

Please note that we use Google Analytics monitoring to analyze traffic and interests on our website, in order to provide an anonymous view of the distribution of visits.
uses personal information - to make internal, marketing decisions (promotions, trends, visits to visiting companies). We don't send these data to third parties.
Learn more about Google's privacy policy: www.google.com/analytics

Please use the buttons below to enable if you accept use Google Analytics, or indicate if you do not enable it.