Easy-to-integrate wireless GSM, LTE/2G alarm signal transmitter with cellular communication
Land-line based security systems are the past. They are more expensive to operate and less secure than modern cellular-based security systems. No need to replace the whole system, only the signal transmitter module. Upgrade to cellular today.
The EASY2S is our reliable cellular alarm signal transmitter and remote input monitoring device for security systems. It is suitable for both alarm signaling, input monitoring (through its I/Os) and can even be used to control connected devices (like gates) remotely.
The communicator receives the incoming alarm signals from connected security sensors through the tip-ring plug and transmits alarm signals to the security monitoring or dispatch center through Contact ID (CID) or SIA DC-09 protocol. The device can be configured remotely using our EasyTerm config tool, or via SMS messages.
Notification can be made:
It emits periodic life signals and provides detection and notification capabilities of wire cut sabotage. The output line can be switched remotely (for gate opening, device control).
Alarms or events can be configured to send immediate SMS notification (up to 4 phone numbers). The device can be ordered with 2G cellular module.
2G/3G antenna with magnetic mount, SMA connection, 0.5 or 2.5m long RG174 cable, max. 3dBi gain
4G LTE antenna with magnetic mount, SMA connection, 2.5m long RG174 cable, 6dBi max. gain
Optional input & output expansion for the Easy2S. Add 6 extra input lines and 3 relays output to the existing […]
Full-featured, cloud-based remote dispatching & monitoring software for safety surveillance of objects and signaling of safety communicators (alarm & fire alarm transmitters, GPS trackers)